Posts for: July, 2020
We all want to look young and vibrant, or at least “age gracefully.” If you're seeking to reduce the visible effects of aging for a more youthful appearance, be sure you include one very important feature—your smile.
Like other aspects of body and health, our teeth and gums can be affected by aging. Even if you've managed for the most part to avoid the ravages of disease or injury, teeth will still naturally wear from a lifetime of biting and chewing food. The attractive shine of young teeth can also give way to yellowing and other discolorations later in life.
But there are ways to turn back the clock, so to speak, through cosmetic dentistry. And you won't necessarily break the bank to gain a more youthful smile: Many cosmetic procedures are quite affordable and minimally invasive.
If your teeth have become worn and edgy, for example, we may be able to soften those sharper edges with a dental drill. Known as enamel contouring (or reshaping), the single-visit procedure is relatively minor and inexpensive, usually without the need for anesthesia. For heavily worn teeth, you may need to step up to veneers, thin layers of tooth-colored porcelain, or crowns that cover the teeth and make them appear longer.
Mild enamel yellowing and staining often responds well to professional teeth whitening. Using a safe bleaching solution, we can temporarily restore brightness to your teeth that you may be able to maintain for a few years with proper care and occasional touchups. For a more permanent solution you can also turn to veneers, crowns or dental bonding for a brighter smile, especially for discolorations that don't respond well to teeth whitening.
While these techniques can restore a youthful appearance to your smile, don't discount the effect of daily care and regular dental visits. Brushing and flossing are fundamental to healthy teeth and gums—and health and beauty go hand in hand.
Age can take its toll on all of us, especially our smiles. But with proper care and perhaps a little cosmetic magic, you can have an attractive smile throughout your lifetime.
If you would like more information on improving your smile as you age, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “How Your Dentist Can Help You Look Younger.”
Complete tooth loss is a common condition among older adults, gradually occurring one or two teeth at a time. There often comes a point of realization, though, that all the teeth will eventually be lost.
This can create a dilemma: Do you replace teeth as they're lost, or go ahead and have all of them removed at one time?
Up until recently, the latter choice seemed the most practical and affordable. But most dentists would agree that keeping natural teeth for as long as practical is better for a person's overall oral health and to slow any potential bone loss.
The emergence of dental implants has made this less of a dilemma: We can use this technology to more affordably replace teeth in stages rather than all at once. This is because an implant is technically a root replacement: a dentist inserts a titanium metal post into the jawbone. Because of an affinity with titanium, bone cells grow and adhere to the implant surface, which creates a stronger hold. It also impedes bone loss.
We can, of course, use implants as individual tooth replacements. But the expense of this approach with multiple teeth puts it well out of reach financially for many people. But implants can also be used as connective points between the patient's jaw and other kinds of dental restorations like bridges, partial dentures, and full removable or fixed dentures.
Using this approach, we can adopt a strategy of allowing healthier teeth to remain until it's necessary to remove them. We initially place implants to support a bridge, for example; later we can use the same implants along with additional ones to support a larger restoration, even a fixed full denture.
An implant-supported restoration is typically more expensive than traditional bridges or dentures, but far less than replacing teeth with individual implants. And because the stages of restorations may occur over a long period of time, the cost can be spread out to make it more manageable.
If you're facing a future where it's likely you'll lose all your teeth, you don't have to lose them all at once. Staged restorations with implants could help you hold on to your natural teeth for as long as possible, slow bone loss and make for a healthier mouth.
If you would like more information on the wide array of dental restoration options, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Replacing All Teeth But Not All at Once.”
Nothing beats the form and function of a real tooth—but dental implants come pretty close. That's why they're tops among both dentists and patients for replacing missing teeth.
Much of an implant's functionality and durability can be credited to its material construction, from the titanium metal post imbedded in the jawbone to the lifelike porcelain crown attached at its other end. But an implant's “nuts and bolts” isn't the only reason why this premier dental restoration is so popular: A good portion of their success comes from the adjunct support provided by digital technology.
Without this varied array of computer-based applications used in planning, designing and installing them, implants couldn't produce the level of satisfactory outcomes they currently do. Here then are a few of the high-tech tools dentists use to make sure your implants result in a winning smile.
CBCT scanning. Implant placement requires a high degree of precision often complicated by various anatomical structures like nerves, blood vessels and sinuses within the gums and jaws. Cone Beam Computer Tomography (CBCT) scanners rotate around a patient's head, taking hundreds of digital x-ray images that are then assembled into a 3-D model image. Dentists can view this model from various angles to identify obstacles and better pinpoint the best implant locations.
Digital impressions. Dentists can also create a 3-D digital impression model of the inside of a patient's mouth that can give them views of their current teeth and gums from any angle. This aids in determining the size and type of implant so that it blends seamlessly with remaining teeth. A digital impression can also provide both the dentist and patient a preview appearance of their future smile after treatment.
3-D printed surgical guides. To accurately drill the implant site during surgery, dentists often create a custom-made device called a surgical guide that fits into the patient's mouth during the procedure. Using results from scanning and digital impressions, highly accurate guides can be created with a 3-D printer. This further ensures that the implant will be in the exact best location for the most attractive and functional outcome.
Implantology is as much art as it is science in achieving a beautiful smile. These and other digital tools help make that desirable end a reality.
If you would like more information on dental implants, please contact us or schedule an appointment for a consultation.